Kaleep Remote-controlled Drones High Capacity DJI Battery for Phantom 2 and Phantom 2 Vision (White) 11.1V 6000mAh Intelligent Flight LiPo Battery For DJI Phantom 2 Vision Professional

Description:
Do not charge battery immediately after flight, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. The battery cannot be changed outside of the temperature range of 0℃-40℃.
Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life.
Article number: PH2
Capacity: 6000mAh(66.6WH)

Battery Type: LiPo
Voltage: 11.1V
Operating temp:32° – 104°
Charging time: 67 minutes
Flight time: 23 minutes
Weight: 400g

Package Content:
1* DJI Phantom2 battery
the battery also has built-in sensors and bright LEDs that let you know the status and remaining power of your battery in real time.
11.1V of power Along with a 6000 mAh capacity for reliable power. Also features integrated power management and balanced charging capability.
Rechargeable design Allows lasting use. Note: Must be charged using a DJI-approved adapter at a temperature between 32° and 104°.
4 LEDs Let you know the status and remaining battery power.
Smart charge/discharge functionality Helps protect the battery. Note: Charge and discharge the battery completely once every 20 cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on.
[amz_corss_sell asin=”B01ANCEOIS”]